Are you thinking of buying a Micro ATX or Mini ITX motherboard? If you are, you should be aware of the differences between Micro ATX Vs Mini ITX before making a purchase. In this article, we compare the differences in four parameters: RAM slot size, PCIe slots, and cost. The mainboard is an important part of your computer. You’ve found the right place (PC Part Builder), if you want to create a new computer but aren’t sure which motherboard is best for you. Micro ATX & Mini ITX are perhaps the most popular motherboard sizes, despite the fact that they exist in a variety of shapes and sizes.
Micro ATX Vs Mini ITX:-
This section compares and contrasts Micro ATX Vs Mini ITX in four different ways.
The first item to compare between Micro ATX and Mini ITX is their dimensions. Micro ATX has dimensions of 244 x 244mm (9.6′′ x 9.6′′). Mini ITX, on the contrary, has dimensions of 170 x 170mm (6.7′′ x 6.7′′). When their sizes are compared, the Mini ITX comes out on top.
Slots for RAM:-
Whenever it goes to Micro ATX Vs Mini ITX, there are also the RAM slots to consider. It has up to four memory slots for Micro ATX. Mini ITX, on the other hand, only has two RAM slots, each of which can only hold 16GB of RAM. So, if you really need over 32 GB of RAM in the future, you won’t be able to expand the RAM in Mini ITX. One of the grounds you shouldn’t only look at the size is because of this. However, there are also the slots that are included.
The difference between Micro ATX and Micro ITX in terms of PCIe slots is even greater. There are four slots on Micro ATX mainboards. Only one PCIe slot is available on Mini ITX mainboards. These ports are used to connect a graphics card to a computer.
Slots are often seen on the circuit board’s rim. As a result, if the mainboard space is limited, installing a powerful graphics card may be difficult. As a result, a Micro ATX mobo is preferable because it has more PCIe slots.
The pricing is the final factor to consider when comparing Micro ITX Vs Micro ATX. It is widely assumed that because Mini ITX motherboards are smaller, they are less expensive. However, you are incorrect; Micro ATX is perhaps the most cost-effective. The corporation was able to cut expenses due to the huge demand for the product. When selecting a Micro ATX motherboard, however, you must ensure that the component quality fulfils the specifications.
For PC gaming:-
If you’re building a gaming PC, a Micro ATX board is the way to go. You’ll be able to combine additional RAM as a result. There is also support for a dual-GPU arrangement, after which there is space for extension. You can modify the machine later as the count of PCIe slots grows. Mini ITX alone is a suitable solution if there’s not enough room. However, because the channel faces the edge, if you want to utilize a Mini ITX, the dimension of the GPU that will be included in the system must also be small.